G-TEL Enterprises, Inc. Dynamic Handset V1 with Spade Connectors |
| (Model # HS-DYN-V1-SPD-32) Note: Picture may not represent the actual product. We are continuously working on improving our website and reserve the right to change specifications, availability, and pricing without prior notice. G-TEL HS-DYN-V1-SPD-32 Dynamic Handset V1 is a durable handset with a high-quality receiver and dynamic microphone.
HS-DYN-V1-SPD-32 Handset Features:
- Handset type: SD-45150H20 Standard Receiver and DT-05 Dynamic Type 1 Transmitter
- Handset handle and cap material: ABS
- Wiring: Four 24 gauge Teflon insulated wires (2 for receiver, 2 for transmitter), with 4 spade conductors
- Armored Cord Assembly.: 304 Stainless Steel, Interlock style. Inside Diameter, 0.250", 6.350mm. Outside Diameter, 0.329", 8.357mm. Linear Pull Test Load, 1000 lbs., 454 kg
- Includes steel lanyard which is anchored to handset handle. Steel lanyard has a pull test load of approx. 550 lbs, 250 kgs.
- Other Components: Lanyard block retainer; anti-rotation wedge; transmitter holder; blue rubber grommet to seal handset/cord connection
- Receiver Specifications:
- DC Resistance at 20 degress C : 145 ± 15 ohm
- Frequency Response Range: 300-3400 Hz
- Sensitivity: 100 ± 2 dB at 60mv
- Impedance: 150 ± 30 ohm at 1 KHz
- Transmitter Specifications:
- Type : Dynamic Type Transmitter
- Response Range : -66 ± 3.5dBV(300-3300Hz)
- Frequency Response : 1KHz: -66 ± 3.5 dbV
- Impedance : 150 ± 30 ohm
- Electrostatic Discharge : Breakdown Volt. 15KV.Min
- Screw terminal
Display all product SKU information
| SKU | Length |
Restock Fee |
|---|
| HS-DYN-V1-SPD-24 | 24" |
I Accept a 35% Restock Fee on Return |
| HS-DYN-V1-SPD-32 | 32" |
I Accept a 35% Restock Fee on Return |
| HS-DYN-V1-SPD-52 | 52" |
I Accept a 35% Restock Fee on Return |
| HS-DYN-V1-SPD-14 | 14" |
I Accept a 35% Restock Fee on Return |
| HS-DYN-V1-SPD-18 | 18" |
I Accept a 35% Restock Fee on Return |
| |
|
Email Page
