Chatsworth Products Single Earthquake Bracing Kit |
| (Model # 10695-001) Note: Picture may not represent the actual product. We are continuously working on improving our website and reserve the right to change specifications, availability, and pricing without prior notice. Stabilizes cable runway hung from threaded rods. Material is 2" x 3/8" steel with Gold over zinc plating.
Features:
- Kit consists of:
- 2 each steel bars (45-degree angle)
- 4 each 1/2-13 x 1 1/4" hex nuts & cap screws
- 4 each 1/2" split lock washers
- Installation will require:
- 1 each 2’ x 2’ x 3/16’ steel angle of appropriate length (11420)
- Angle must be trimmed to proper length and drilled during installation
NOTE: Installation may also require:
- For concrete ceiling-
- 5/8-11 concrete anchors (06001-001)
- 5/8-11 x 3-1/2" studs (20068-304)
- 5/8-11 hex nuts (20142-111)
- 5/8" split lock washers (04003-001)
- For secondary structure:
- 5/8-11 threaded rods of appropriate length (11440)
- Rod must be trimmed by installer
- Grid clamp kits (10609)
- 5/8-11 hex cap screws of appropriate length (02004 Series)
- 5/8-11 hex nuts (20142-111)
- 5/8" split lock washers (04003-001)
| |
|
Email Page
