Chatsworth Products Wall-Mount CUBE-iT Plus Cabinet

The patented Cube-it Plus Cabinet System is a series of wall-mounted and floor-supported telecommunications enclosures designed to secure communications equipment for a cross connect. The cabinets are copper and fiber ready, and feature easy access to the front or rear of the cabinet.

Features:

• Swing-out cabinet body enables easy access to the rear of installed equipment
• Rear panel is pre-punched with knock-outs for 1/2", 3/4", 2-1/2" and 3" conduit, and has cable tie points and attachment points for accessory rack-mount brackets
• Cabinet body includes one pair of adjustable 19" EIA threaded equipment rails
• Cabinet body is vented - vents will accept accessory fan
• Front door design incorporates rounded edges and corners to improve safety in public access spaces
• A locking front door and rear panel provide security
• Wide variety of accessories are available

Specifications:

• UL listed to support up to 200 lbs
• Patented hinge design allows the installer to remove the rear panel for easy installation
• For indoor use only, not for use in air-handling spaces
• Usable heights: 24"H = 12 RMU; 36"H = 18 RMU; 48"H = 26 RMU
• Includes one pair of 19"W adjustable (front-to-rear) mounting rails with Universal 5/8"-5/8"-1/2" alternating hole pattern
• EIA-310-D compliant
• Front rails are threaded for #12-24 mounting screws
• Cable knockouts include: (4) 1/2" or 3/4", two on top, two on bottom; (8) 2-1/2" or 3", four on top, four on bottom; (4) edge-protection grommets are included for 3" knockouts
• 5" deep rear panel punched to accept accessory equipment mounting brackets
• Constructed or riveted and bolted steel with epoxy-polyester hybrid powder coat paint finish
• Equipment mounting rails are aluminum
• Ships fully assembled with mounting hardware, 50 each #12-24 screws and installation template