Schneider Electric Smart-UPS RT 5000VA 208V w/ 208V to 120V Step-Down Transformer |
(Model # SURTD5000XLT-1TF3) Note: Picture may not represent the actual product. We are continuously working on improving our website and reserve the right to change specifications, availability, and pricing without prior notice. Smart-UPS RT 5000VA 208V w/ 208V to 120V Step-Down Transformer is a high-density, performance UPS for voice and data networks, medical labs, and light industrial applications.
SURTD5000XLT-1TF3 Step-Down Transformer Features:
- Automatic internal bypass:
Supplies utility power to the connected loads in the event of a UPS overload condition or fault
- Scalable runtime:
Allows additional run time to be quickly added as needed
- Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging
- Hot-swappable batteries:
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
- Automatic restart of loads after UPS shutdown:
Automatically starts up the connected equipment upon the return of utility power
- Network manageable:
Provides remote management of the UPS over the network.
- InfraStruXure Manager Compatible:
Enables centralized management via the APC InfraStruXure Manager
- SmartSlot:
Customize UPS capabilities with management cards
- LED status indicators:
Quickly understand unit and power status with visual indicators
- Serial Connectivity:
Provides management of the UPS via a serial port
- Plug-and-Play external batteries:
Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS
- Rack/Tower convertible:
Protects the initial investment in the UPS when migrating from tower to rack-mount environment
- Flash upgradeable firmware: Install maintenance releases of firmware remotely using FTP
- User-replaceable batteries:
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
- Automatic self-test:
Periodic battery self-test ensures early detection of a battery that needs to be replaced
- Predicitive failure notification:
Provides early-warning fault analysis ensuring proactive component replacement
- Disconnected battery notification:
Warns when a battery is not available to provide backup power
- Audible alarms: Provides notification of changing utility power and UPS conditions
- Frequency and voltage regulation:
Gives higher application availability by correcting poor frequency and voltage conditions without using the battery
- Power conditioning:
Protects connected loads from surges, spikes, lightning, and other power disturbances
- Input power factor correction:
Minimizes installation costs by enabling the use of smaller generators and cabling
Technical Specifications
- Output Power Capacity:
3500 Watts/ 5000 VA
- Max Configurable Power:
3500 Watts/ 5000 VA
- Nominal Output Voltage:
120V,208V
- Output Voltage Note:
Configurable for 208 or 240 nominal output voltage
- Efficiency at Full Load:
92%
- Output Voltage Distortion:
Less than 3%
- Output Frequency (sync to mains):
50/60 Hz +/- 3 Hz user adjustable +/- 0.1
- Crest Factor:
3 : 1
- Waveform Type:
Sine wave
- Output Connections:
- (8) NEMA 5-20R
- (1) NEMA L14-30R
- (4) NEMA L6-20R
- ((2) NEMA L6-30R
- Nominal Input Voltage:
208V
- Input Frequency:
50/60 Hz +/- 5 Hz (auto sensing)
- Input Connections:
NEMA L6-30P
- Cord Length:
10'
- Input voltage range for main operations:
160 - 280V
- Input voltage adjustable range for mains operation:
100 - 280V
- Battery Type:
Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
- Included Battery Modules:
2
- Typical recharge time:
2.50 hour(s)
- Replacement Battery:
RBC44
- Interface Port(s):
RJ-45 Serial,SmartSlot
- Surge energy rating:
480 Joules
- Dimensions: 17" H x 10.2" W x 26" D
- Package Contains:
- (1) Transformer
- (1) CD with Software
- (1) Smart UPS Signalling RS-232 Cable
- (1) User Manual
- (1) Web/SNMP Management Card
| |
|