I) Programming
Speakerphone must be programmed remotely from a separate line, using any Touchtone Telephone.
This reference works with the following phones:
Note: During program mode, a beep must be heard before programming, phone can be disconnected at any time by pressing *, #, *, *.
- To set Receiving Level
- Press #, #, 61, XX, *, # (Where XX= between 00 and 99)
- To set Transmit Level
- Press #, #, 62, XX, *, #. (Where XX= between 00 and 99)
- Length of Call (Default=2 minutes)
- Press #, #, 63, XX, YY, *, #. (Where XX=minutes and YY= seconds)
II) How to set your Security Code (optional) by default, phone has no security code setting.
Press #, #, 76, #, 56, enter 4-digit code, *, #. (If used, remember the numbers)
III) How to Deactivate the security code
Press #, enter your 4-digit code, #, 76. (1 beep + 3 beeps= Deactivate)
IV) Programming Example (with Security code)
To Program Length for a Call for 3 minutes and 45 seconds (with security code)
- Press #, enter your 4-digit code, #, 63, 03, 45, *, #.
Products
|