The CableCat Family
CableCat provides support of high-performance cabling including Category 5 and higher speed copper cable, Fiber optic and innerduct. A variety of sizes are available to accommodate up to 425 four-pair UTP. This is a cost effective alternative to cable trays. Factory or field made assemblies allow for attachment to virtually any structural member.
"The Original"
The first wide-base J-Hook assembly was specifically designed for high performance telecommunications cabling. The "original" CADDY CableCat J-Hooks, with 1-5/16" and 2 " diameter loops, have expanded into a comprehensive line of solutions for any application. The wide-base J-Hook provides proper support and routes cables with a sufficient bend radius to prevent pressure on cables.
Small Bundle Support
This new size was designed to comply with the current 1997 TIA standard 569-A, which allows for attachment to ceiling wire and grid. Factory assemblies are also available for attachment to other structures. The CAT12 size J-Hook holds up to 16 four-pair UTP or fiber optic cables and is equipped with a unique bend-back tab to provide containment without pressure on cables.
Large Bundle Support
Now providing the widest support available in the CableCat family, the new CAT425 can adjust to a 4" or 6" diameter loop. This flexible cable wrap can hold up to 425 four-pair UTP or fiber optic cables and quickly attaches to beams or purlins. It's simple locking and unlocking feature allows for the addition of cables without a hitch, and cables pull easily through the closed support system. This Cat is suitable for air handling spaces (plenum) for loads up to 100 lbs.
Underfloor Support
The CableCat J-Hook is now available for raised floor environments. Cables are easily organized off the floor and the wide-base J-Hook provides a cost-effective alternative to cable trays. This underfloor CableCat is pre-riveted to a fully assembled fastener ready to attach to the floor pedestal. Now from roof to floor, ERICO has a CADDY CableCat solution to fit.
CableCat Wide Base Cable Support
|
Features:
Provides proper support of Category 5, fiber optic and innerduct
Variety of sizes and designs available to attach to virtually any structure
Cost effective alternative to expensive cable tray
Galvanized finish on J-hooks provide smoother cable pull and greater corrosion resistance
Complies with UL, cUL, NEC and EIA/TIA requirements for structured cabling systems
|
Sizing Chart |
---|
| Catalog Number | Description | QTY Per Box |
---|
| CAT12 | Up to 16 4-pair UTP or 2-strand fiber optic cable - 3/4" dia. loop | 50 | | CAT21 | Up to 50 4-pair UTP pr 2-strand fiber optic cable or innderduct 1-5/16" dia. loop | 80 | | CAT32 | Up to 80 4-pair UTP or 2-strand fiber optic cable or innderduct 2" dia. loop | 60 | | CAT64 | Up to 300 4-pair UTP or 2-strand fiber optic cable 4" dia. loop | 25 | | CATHBA | Angled hanger bracket | 40 | | S3575BP100 | 1/4" - 20 x 3/8" round head screw | 100 | | S3575DP100 | 1/4" - 20 x 3/4" round head screw | 100 | | CATTS | Support from tee grid | 100 |
Kits for Category 5 Cable Hangers |
---|
| Description | QTY Per Box | CATKITA | (20) CAT32
(5) CATHBA Hanger
(5) BC200 Beam Clamps | 1 Kit | CATKITB | (10) CAT21
(10) CAT32
(5) CATHBA Hanger
(5) BC200 Beam Clamps
Screws included | 1 Kit | CATKITC | (20) CAT21
(5) CATHBA Hanger
(5) BC200 Beam Clamps
Screws included | 1 Kit |
Pre-Riveted Factory Assemblies for 3/4 |
---|
| Catalog Number | Description | QTY Per Box |
---|
| CAT12BC | Screw-on 1/8" thru 1/2" flange | 40 | | CAT12BC200 | Screw-on 1/8" thru 5/8" flange | 40 | | CAT1224 | Hammer-on 1/8" thru 1/4" flange - bottom mount rotates 360 degrees | 40 | | CAT1258 | Hammer-on 5/16" thru 1/2" flange - bottom mount rotates 360 degrees | 40 | | CAT12912 | Hammer-on 1/2" thru 3/4" flange - bottom mount rotates 360 degrees | 20 | | CAT12VF14 | 1/2" thru 1/4" vertical flange | 40 | | CAT12AF14 | 1/16" thru 1/4" Z Purlin | 40 | | CAT124Z34 | #12 thru 1/4" wire, plain or threaded rod and 1/8" thru 3/8" flange | 60 | | CAT126Z34 | 3/8" plain or threaded rod and 3/8" thru 9/16" flange | 60 | | CAT12AFAB3 | Angle bracket | 80 | | CAT12BCB | Screw-on 1/8" thru 1/2" flange - rotates 360 degrees | 40 | | CAT12BC200B | Screw-on 1/8" thru 5/8" flange - rotates 360 degrees | 40 | | CAT12TS | Acoustical tee bar | 60 | | CAT12CD1B | Under floor support to pedestal | 20 |
Pre-Riveted Factory Assemblies for 1-5/16 |
---|
| Catalog Number | Description | QTY Per Box |
---|
| CAT21528 | Cable to acoustical tee bar | 20 | | CAT21BC | Screw-on 1/8" thru 1/2" flange | 40 | | CAT21BC200 | Screw-on 1/8" thru 5/8" flange | 40 | | CAT2124 | Hammer-on 1/8" thru 1/4" flange - rotates 360 degrees | 40 | | CAT2158 | Hammer-on 5/16" thru 1/2" flange - rotates 360 degrees | 40 | | CAT21912 | Hammer-on 1/2" thru 3/4" flange - rotates 360 degrees | 20 | | CAT21VF14 | 1/16" thru 1/4" vertical flange | 40 | | CAT21AF14 | 1/16" thru 1/4" Z purlin | 40 | | CAT214Z34 | #12 thru 1/4" wire, plain pr threaded rod and 1/8" thru 3/8" flange | 60 | | CAT216Z34 | 3/8" plain or threaded rod and 3/8" thru 9/16" flange | 60 | | CAT12AFAB3 | Angle bracket | 50 | | CAT21BCB | Screw-on 1/8" thru 1/2" flange - rotates 360 degrees | 40 | | CAT21BC200B | Screw-on 1/8" thru 5/8" flange - rotates 360 degrees | 40 | | CAT21CD1B | Under floor support to pedestal | 20 |
Pre-Riveted Factory Assemblies for 2 |
---|
| Catalog Number | Description | QTY Per Box |
---|
| CAT32528 | Cable to acoustical tee bar | 20 | | CAT32BC | Screw-on 1/8" thru 1/2" flange | 40 | | CAT32BC200 | Screw-on 1/8" thru 5/8" flange | 20 | | CAT3224 | Hammer-on 1/8" thru 1/4" flange - rotates 360 degrees | 40 | | CAT3258 | Hammer-on 5/16" thru 1/2" flange - rotates 360 degrees | 20 | | CAT32912 | Hammer-on 1/2" thru 3/4" flange - rotates 360 degrees | 20 | | CAT32VF14 | 1/16" thru 1/4" vertical flange | 40 | | CAT32AF14 | 1/16" thru 1/4" Z purlin | 40 | | CAT324Z34 | #12 thru 1/4", plain or threaded rod and 1/8" thru 3/8" flange | 40 | | CAT326Z34 | 3/8" plain or threaded rod and 3/8" thru 9/16" flange | 40 | | CAT32AB | Angle bracket | 40 | | CAT32CPNA | Longer leg angle bracket | 50 | | CAT32BCB | Screw-on 1/8" thru 1/2" flange rotates 360 degrees | 20 | | CAT32BC200B | Screw-on 1/8" thru 5/8" flange rotates 360 degrees | 20 | | CAT32CD1B | Under floor support to pedestal | 20 |
4 |
---|
| Catalog Number | Description | QTY Per Box |
---|
| CAT64BC | Screw-on 1/8" thru 1/2" flange | 25 | | CAT64BC200 | Screw-on 1/8" thru 5/8" flange | 25 | | CAT6424 | Mount rotates 360 degrees | 25 | | CAT6458 | Mount rotates 360 degrees | 25 | | CAT64912 | Mount rotates 360 degrees | 25 | | CAT64VF14 | 1/16" thru 1/4" vertical flange | 25 | | CAT64AF14 | 1/16" thru 1/4" Z purlin | 25 | | CAT64CPNA | Longer leg angle bracket | 25 | | CAT64AB | Angle bracket | 25 | | CAT64BCB | Screw-on 1/8" thru 1/2" flange rotates 360 degrees | 25 | | CAT64BC200B | Screw-on 1/8" thru 5/8" flange rotates 360 degrees | 25 | | CAT64CD1B | J-hook to 3/4" & 1" round or square pedestal | 25 |
CableCat Pully
|
Features:
Frees up the "second man" on cable pulling
CAT32PLR accepts up to 20 four-pair cables (CAT64PLR - 40 pair cables)
Complies with the TIA standard requirement by minimizing the pull force on the cable
Maintains proper bend radius and protects cable during the installation
Kit includes J-hook, pin, wheel and retainer
When the job is complete, the pulley and pin assembly can be removed leaving the J-hook as a cable support
The CAT32PLR pulley components can be used on any current design CAT32 J-Hook
|
Ordering Information |
---|
| Description | QTY Per Box | CAT32PLR | Pulley Kit - CAT32 2" J-hook, pin, wheel and retainer | 10 | CAT64PLR | Pulley Kit - CAT64 4" J-hook, pin, wheel and retainer | 10 |
CableCat Adjustable Cable Support
|
Features:
Up to 425 cables of 4-pair UTP or fiber optic - 4" or 6" dia. loop
Provides proper support of Category 5, fiber optic and innerduct
Variety of sizes and designs available to attach to virtually any structure
Cost effective alternative to expensive cable tray
Complies with UL, cUL, NEC and EIA/TIA requirements for structured cabling systems
Suitable for air handling spaces (plenum)
|
Ordering Information |
---|
| Catalog Number | Description | QTY Per Box |
---|
| CAT425WM | Wall mount - Vertical surface | 10 | | CAT425 | 1/4" threaded rod or horizontal surface mount | 10 | | CAT425A6 | 3/8" threaded rod | 10 | | CAT42524SM | Hammer-on 1/8" - 1/4" flange | 10 | | CAT42558SM | Hammer-on 5/16" - 1/2" flange | 10 | | CAT425912SM | Hammer-on 9/16" - 3/4" flange | 10 | | CAT425BC | Screw-on 1/8" 1/2" flange (rotates 360 degrees) | 10 | | CAT425BC200 | Screw-on 1/8" - 5/8" flange (rotates 360 degrees) | 10 | | CAT425AF14 | Hammer-on 1/16" - 1/4" Z purlin | 10 | | CAT425VF14 | Hammer-on 1/16" - 1/4" vertical flange | 10 | | CAT425CD1B | Under floor to pedestal | 10 |
CableCat Vertical Backbone Cable Support
|
Features:
Makes vertical cable pulling easier; locking mechanism opens during pull and re-engages when cable is released
Accepts wide range of cable sizes: (80) 4-pair UTP, (10) 25-pair UTP, (1) each 100-pir through 600-pair
Available as wall-mount (#CAT600WM) or strut-mount (#CAT600R)
Strut-mount includes pre-riveted assembly that twist-locks into the strut
Rounded edges prevent cable damage
Valuable space savings withing telecom closets
More versatile allowing future additions of cable runs
Reduces installation time
Allows cable installation to start at the bottom floor
Galvanized finish for corrosion protection
|
Ordering Information |
---|
| Catalog Number | Description | QTY Per Box |
---|
| CAT600WM | Wall Mount | 2 | | CAT600R | Strut Mount | 2 | | CAT600RKIT | Strut mount kit with (1) 18" precut slotted strut & (4) CAT 600R | 1 |
|