Sales staff available
Mon-Fri, 7AM - 5PM PST
877-389-0000

Emergency Phones

Hall, Elevator, and Emergency Phones - These Telephone Sets are designed for flush mounting in elevators or where a standard wall mounted telephone might be subject to accidental damage, cause injury or occupy valuable space, such as hallways. The set components are mounted on a heavy-gauge formed sheetsteel panel finished in black baked enamel. The handset contains a powerful magnet, which holds it securely in place. In accordance with FCC regulations, all handsets furnished with these telephones are equipped with Hearing Aid Compatible amplified receiver units with automatic volume reset.

Speakerphone models have a momentary switch which automatically disconnects after two minutes. All models are fully powered from the telephone line and offer vandal resistant construction. Panel is mounted to the Wall Can with tamper-proof screws.

Outlet Boxes

Except in the case of the Speakerphone, installation of these sets requires a GB62247 Outlet Box. The GB62248 Frame is optional and must be ordered separately. The wall can fit a recess measuring approximately 10 1/4"H x 7 1/4"W x 3"D. The Speakerphones include a wall can and ringer. Optional trim frame should be ordered separately.

The GB30618, GB62247, and GB62248

Surface Mounting Frame, Outlet Box, and Trim Frame.

GB30618

GB62247
Outlet box w/tamperproof screws. Required for GB522 and GB252 installation.

GB62248
Trim Frame used as finishing for the GB30618 Surface Mounting Frame.

Elevator/Hall Telephone Sets

For those models not furnished with an outlet box, order the GB62247 Outlet Box separately. The GB62248 Trim Frame is optional on all models, order separately as well. All models are equipped with a straight line ringer. Dimensions of Telephone Sets only (less wall can & frame) are 9.846" H x 6.78" W x 2.84" D.

GB522VD
Elevator/Hall Telephone Set equipped with amplified receiver and a Push-button Pulse dial. No outlet box.

GB522VN
Elevator/Hall Telephone Set less Dial e/w amplified receiver. No outlet box.

GB252VD
Elevator/Hall Telephone Set equipped with amplified receiver and Push-button Tone Dial. No outlet box.

GB522VS
Elevator/Hall Telephone Set e/w amplified receiver, programmable, single number Autodialer (for Tone Output ONLY). No outlet box. Not recommended for use when temperatures are below freezing.

GB555N
Elevator/Hall Speakerphone with 2-minute Auto disconnect, Outlet Box and Ringer. Less Dial and GB62248 Trim Frame.

GB2555
Elevator/Hall Speakerphone with Tone Dial, Outlet Box and Ringer. Less GB62248 Trim Frame. E/w 2 minute Auto-Disconnect Switch.

GB555SND
Elevator/Hall Speakerphone with 2 minute Auto Disconnect, 12 Digit Auto Dialer, Outlet Box and Ringer. Less GB62248 Trim Frame. E/w 2 minute Auto-Disconnect Switch.

GB523V and GB524V Emergency Telephone Set Models

The GB523V and GB524V Telephones are e/w "high stress" armored cords and vandal resistant hardware. Each is available with any of four dial options. E/w amplified receiver and auto volume reset button. Baked on enamel finish may be ordered in either black or red.

GB523 models are designed to be mounted in existing outlet boxes that are at least 7"W x 10"H x 3"D or with the optional GB62247 Outlet BOx and GB62248 Trim Frame. GB524 models are designed to flush mount in an existing opening. They come complete with the outlet box, trim frame and a magnetic hinged door e/w a pull handle.

GB523VN

GB523VS
Automatic Tone Dial, 12-digit, line powered, no frame or can.

GB523V
Pushbutton Pulse Dial, no frame or can.

GB2523V
Tone dial, no frame or can.

GB524V
Pulse dial. Furnished with GB524-L1 Wall Can/Door and frame assembly.

GB524VN
No dial. Furnished with GB524-L1 Wall Can/Door and frame assembly.

GB524VS
Line powered, single line programmable SND. Furnished with GB524-L1 Wall Can/Door and frame assembly.

GB2524V
Tone dial. Furnished with GB524-L1 Wall Can/Door and frame assembly.

GB524-L1
Wall Can/Door and Frame Assembly.

The GB31454 and GB31454-SND Emergency Telephone Sets

The GB31454 and GB31454-SND measure 7"H x 4.5"W x 2.5"D. They are pushbutton operated, the line being connected when the pushbutton is momentarily pressed. They also have a 2-minute "Time-Out" feature which disconnects the call after 2 minutes. An LED is provided to indicate an "Off Hook" condition.

The GB31454 is for Auto Ring Down or Dedicated lines, and the GB31454-SND is e/w a programmable, single number autodialer. The GB31560 measures 9.7"H x 4.5"W x 2.5"D. It is the same as the GB31454 except that it has a tone dial. The GB31454, GB31454-SND and GB31560 Mini-Elevator Speakerphones are designed for indoor applications with limited space, such as elevators, parking ramps, campuses and door entry. They can be surface mounted or flush mounted in existing wall cans. They are powered by the telephone line with no batteries or AC power required. They are finished in black textured baked-on enamel.

GB31454

GB31454-SND
Mini-Elevator speakerphone w/automatic dialer, equipped with 12 digit programmable sutomatic dialer, ringer and a 2 minute automatic disconnect.

A.D.A. Telephone Sets for the Physically Challenged

AllenTel Products makes it easy for you to comply with the American Disabilities Act (ADA) as it applies to Hall and Elevator Telephones. Check the following features: Two New MINI SPEAKER-PHONE designs are available - the GB31454SND-ADA for automatic 11 digit single number emergency dialing and the GB31454-ADA without the single number dial for automatic ring-down applications.

GB31454-ADA

Mini Elevator Speakerphone, No dial
Instant Emergency Calling
Braille Labeling
On-line and Flashing Lamps
Identification Tones
Auto Answer
Two-Minute Auto Disconnect
Totally Line Powered

GB31454SND-ADA
Mini Elevator Speakerphone e/w 11 digit Single Number Dialer.

GB555-ADA
Elevator/Hall Speakerphone

GB555SND-ADA

Emergency telephone with 11 digit single numbered dial.
Mini Elevator Speakerphone, No dial
Instant Emergency Calling
Braille Labeling
On-line and Flashing Lamps
Identification Tones
Auto Answer
Two-Minute Auto Disconnect
Totally Line Powered

A.D.A. Telephone Sets all come with these features:

Push Button

Braille Labels For those with impaired sight, a Braille label marked "Telephone" identifies the product. A Braille label on the push-button marked "Push" completes the instruction.

Lamps Two LED lamps are provided for the hearing impaired. The green LED operates when the push-button is depressed indicating the call is being activated (off-hook condition). The "Help Is On The Way" LED is controlled by the emergency operator and provides visual confirmation.

I.D. Tones A three digit tone signal is automatically transmitted to the emergency operator to indicate the location of the caller.

Auto Answer The operator may initiate a call to the telephone and monitor for indications of a suspected emergency.

Specifications All units are designed to meet requirements of the American Disability Act, Appendix B, Paragraph 4.10.14. The standard finish is black-textured, baked-on enamel. Other colors available on special order. The GB31454 is 7" H x 4.5" W x 2.5"D. The GB555 is 9.846" H x 6.78" W x 2.84"D.

top

TelephoneStuff.com is a leading provider of phone systems. We specialize in business phones and business phone systems for small to large companies; with phone systems for any application. All orders, small or large, are welcomed with no minimum order requirements.