MRP-SS Surge Suppressor:
MPR-SS transient voltage surge suppressor provides protection for MPR Series Modules when mounted in raceways. Mounts in integral J-Box with supplied double-stick tape, use one per circuit.
MPR-SS Surge Suppressor |
---|
Part # | Description |
---|
MPR-SS | MPR surge suppressor, single ciruit |
| |
J Series Jumpers:
J series jumpers connect power modules, providing AC power to all modules on the same circuit. Pre-terminated jumpers feature convenient genderless 30 amp connectors at both ends and are sold in packs of six.
Jumpers |
---|
Part# | Jumper Length | Termination | Quantity |
---|
J-12X6 | 12" | connector on each end | sold in packs of 6 |
| |
Master / Slave Jumper for Power Modules :
Allows M Series slave modules to be switched remotely by an RLM, RM or R Series Master Module.
Master Slave Jumper |
---|
Part # | Jumper Length | Quantity |
---|
JMS-12X6 | 12" | sold in packs of 6 |
T Series Tails:
T series tails connect incoming power to a single circuit within a raceway. One tail required per circuit. Each tail features a pre-terminated 30 amp connector that plugs in to a module at one end, and wire tails for J-box connection on the other. Sold in packs of six.
Tails |
---|
Part# | Jumper Length | Termination | Quantity |
---|
T-24x6 | 24" | connector on one end, tails on the other | sold in packs of 6 |
| |
Universal Sequencing Controller & Remote Wallplate Keyswitch:
Universal Sequencing Controller:
The USC-6R Universal Sequencing Controller provides 6-step sequencing control to any AC power distribution system that can be controlled by either switch closure or 12 volt DC. Sequencing can be initiated locally via a convenient front panel switch, as well as remotely via our wallplate keyswitch (USC-KL) or any momentary dry-contact closure switch. Featuring an interval delay selector of 1, 3, or 6 seconds between sequence steps, the unit additionally provides 4 different start delay settings, allowing up to three USC-6R units to be interconnected to operate as a single 18 step unit. Occupying one rackspace, the USC-6R front panel includes individual channel LED status indicators, as well as master power, local sequence initiation, and interval delay controls. 9” deep, finished in a durable black powder coat.
Remote Wallplate Keyswitch:
The USC-KL provides remote up/down sequence initiation via a secure keyswitch. Status LED indicators also provided and connect to our USC-6R Universal Sequencing Controller via a convenient RJ-45 jack.
USC |
---|
Image | Part # | Description | Steps | Control Outputs |
---|
| USC-6R | Universal Sequencing Controller | 6 individually sequenced | 12 volt DC and switch closure | | USC-KL | Remote wallplate keyswitch with LED status indicators
Additonal set of keys for the USC-KL: USC-KEY | | |
Modular Power Raceway System
Design and build a custom power distribution system
Modular Raceway Power Modules
RLM Series, RM Series, R Series, and more..
|