TelephoneStuff.com
Sales staff available
Mon-Fri, 7AM - 5PM PST
877-389-0000
Home
Catalog
Info Center
Help
Your Account
 
  view cart check out  
HomeInfo CenterRacksCablofil> Support Systems
   
   
GSA Schedule Contract Number: GS-35F-0419X and Federal CAGE Code: 1WXV7    Share    Email This Page To A Friend! Email Page 

From ceiling hung wiring tray installations in a communications closet to a trapeze hung wiring tray installation in a factory, Cablofil® has the right hanging accessory for you. Each hanging accessory is specifically designed to work with Cablofil®'s wire hanging tray and can utilize Cablofil®'s patented FAS system for fast tray attachment without need for additional hardware.


AS Trapeze Hanging Clip

ASB - AS Trapeze Hanging Clip

Features:

  • For trapeze hung installations
  • Use 1/4" or 3/8" threaded rod (2 hex nuts needed)
  • Poly grommet retains in slot - unsnaps for side loading cables
  • Corrosion resistant pre-galvanized finish
  • Tray can be detached on one side only to add cables
  • Threaded rods, nuts, and washers sold separately

Click here for AS Trapeze Hanging Clip specifications PDF


FAS Center Hanger

FAS - Center rod hangers used with 8" to 24" cable trays.

Features:

  • Only one threaded rod is needed to suspend tray
  • Stabilization tube accepts up to 1/2" threaded rod
  • Patented FAS style attachment holds cable tray secure without nuts and bolts
  • Corrosion resistant galvanized finish
  • Threaded rods, nuts, and washers sold separately

Click here for FAS Center Rod Hangers specifications PDF


SAS System Single Hanger Bracket

SASB - System Single Hanger Bracket

Features:
  • For center hung mounting of 4" and 6" EZ Tray (use with 1/4" threaded rod)
  • Snap in attachment requires no bolts, nuts, or tools to attach EZ Tray
  • Corrosion resistant electro zinc galvanized finish
  • Threaded rods, nut and washers sold separately

Click here for SAS System Single Hanger Bracket specifications PDF


FAS Profile

FASP - Support bracket used for trapeze hung installations, or on walls, floors, and cabinets.

Features:
  • Saves installation time - patented FAS style attachment holds cable tray secure without nuts and bolts
  • Corrosion resistant pre-galvanized finish
  • For trapeze hung installations - order one size larger than tray (example: for CF54-300 tray (12") use FASP400)
  • Use with 1/4" rod only
  • Threaded rods (THRD), nut (EZHN/EZCN) and washers (EZFW) sold separately


Note: - Available in 8 different sizes: 8", 12", 16", 20", 22", 24", 28", 40"

Click here for FAS Profile specifications PDF


CS Profile

PROCS1000 - CS Profile

Features:
  • For trapeze mounting tray widths up to 24" to ceilings
  • For widths up to 8", use 1 fastener set (EZBN1-4 and CE 25). For 12", 16" and 18" widths use 2 fasteners (EZBN1-4 and CE 25)
  • Corrosion resistant pre-galvanized finish
  • Can be cut to size on site
  • Square holes accept up to 3/8" rods, slots accept up to 1/4" rods
  • Can be used in conjunction with CS brackets for multi level EZ Tray installation from ceilings
  • Threaded rods, nuts, and washers sold separately

Click here for PROCS1000 CS Profile specifications PDF


FAS C Bracket

FASC - "C" bracket used for cable tray installation under ceilings or overhangs

Features:

  • Saves installation time - patented FAS style attachment holds cable tray secure without nuts and bolts
  • Corrosion resistant pre-galvanized finish
  • Can be stacked for multiple levels of cable tray support

Click here for FASC "C" Bracket specifications PDF


CSC Bracket

CSC - Hanging Bracket

Features:

  • For cable tray installations under ceiling or overhangs
  • Use with tray widths up to 12"
  • To secure tray to support: Use 1 fastener set (EZBN1-4 and CE 25) for tray widths up to 8". Use 2 fasteners for 12" wide tray
  • Corrosion resistant pre-galvanized finish
  • Can be stacked for multilevel EZ Tray installations
  • Nuts, bolts and washers sold separately

Click here for CSC Hanging Bracket specifications PDF


Hardware


Lugs, Nuts, Washers, and Rods
DescriptionGrounding Lug1/4" Coupling Nut1/4" Hex Nut1/4" Flat washer1/4" and 3/8" Threaded Rod
 
Model #GTA2-2EZCN1-4B - 1/4 inch Coupling NutEZHN1-4B - 1/4 inch Hex NutEZFW1-4B - 1/4 inch Flat WasherTHRD1-4 - 1/4 inch Threaded Rod
Model #N/AEZCN3-8B - 3/8 inch Coupling NutEZHN3-8B - 3/8 inch Hex NutEZFW3-8B - 3/8 inch Flat WasherTHRD3-8B - 3/8 inch Threaded Rod


Click here for GTA 2-2 Grounding Lug specifications PDF

NOTE: Viewing PDF documents requires the free Adobe® Reader® version 5.0 or greater.If you don't already have it installed, you will need to download and install it before using PDF documents.
Get Adobe Reader
 
Advanced Search
Contact Us
TWAcomm Network
 
  
top
TelephoneStuff.com is a leading provider of phone systems. We specialize in business phones and business phone systems for small to large companies; with phone systems for any application. All orders, small or large, are welcomed with no minimum order requirements.
GSA, Visa, MasterCard, and American Express Credit Cards Accepted
All logos displayed on this page are registered trademarks with their respective organizations.
Copyright © 1997 - 2024 TWAcomm.com, Inc. All rights reserved. - 3/28/2024 11:02:14 PM - v.8.0.16