|
| 1. | 
Model # T70CIW8
Must Ship By Motor Freight! | | Raceway Covers to be used with T-70, TG-70 and Twin-70 bases. Read More
|
$19.68
|  Detail Box
In Stock |
|
| 2. | 
Model # TG70IW | | TG-70 raceway base and cover in 40'/4pcs length. Supplied with pre-punched mounting holes....Read More
|
$433.68
| Detail Box
Usually ships in 3 days |
|
| 3. | 
Model # TGDW | | Snaps onto rails in TG raceway base to create separate channels. Must use with wire retainers to ensure channel separation per UL/CSA. Available in 8 or 10ft lengths. Gray only. Read More
|
$17.76
| Detail Box
In Stock |
|
| 4. | 
Model # TG70BCIW-X | | Base Coupler Fitting - Each piece includes 2 base coupler halves for joining sections of TG-70 base together....Read More
|
$9.68
| Detail Box
In Stock |
|
| 5. | 
Model # TGECIW | | End Cap - Used to terminate or allow entry to TG raceway. Two knockouts each for ½" (16mm)and 1" (27mm) conduit. Read More
|
$11.86
| Detail Box
In Stock |
|
| 6. | 
Model # TGTD | | TG Tee Divider Insert - Mounts inside TGT tee fitting to maintain channel separation in TG raceway at tee junctions. Gray only....Read More
|
$14.31
| Detail Box
In Stock |
|
| 7. | 
Model # TGTIW | | Tee Fitting - Used to join sections of TG raceway at tee junctions....Read More
|
$23.61
| Detail Box
In Stock |
|
| 8. | 
Model # TGRAIW | | Right Angle - Used to join sections of TG raceway at 90° flat junctions....Read More
|
$30.98
| Detail Box
In Stock |
|
| 9. | 
Model # TGICIW | | Inside Corner - Use to join sections of TG raceway at inside corners. Fittings adjust from 85° to 135° to adapt to non-square corners....Read More
|
$33.27
| Detail Box
In Stock |
|
| 10. | 
Model # T70CCIW-X | | T-70, Twin-70, TE-70 and TG-70 Cover Coupler Fitting. 10 per package....Read More
|
$33.78
| Detail Box
In Stock |
|
| 11. | 
Model # TGOCIW | | Outside Corner - Use to join sections of TG raceway at outside corners. Fittings adjust from 85° to 139° to adapt to non-square corners....Read More
|
$36.12
| Detail Box
In Stock |
|
| 12. | 
Model # RF5X3IW-E | | Reducer Fitting for LD raceway from size 5 to size 3. For use with LD5 and LD3 raceway or to transition from TG-70 raceway. Low voltage standard fittings (data only applications under 48V) are used fo...Read More
|
$3.02
| Detail Box
In Stock |
|
| 13. | 
Model # TG70WR-X | | Wire Retainers - Hold wires in place. Will not interfere with cover installation. Gray only....Read More
|
$3.57
| Detail Box
In Stock |
|
| 14. | 
Model # T70DB-X | | Device Mounting Bracket - Used to mount NEMA standard single gang electrical outlets and communication devices with either screw-on or snap-on single gang faceplates. Can be used with T-70, Twin-70, TE-7...Read More
|
$6.81
| Detail Box
In Stock |
|
| 15. | 
Model # TG70HB3-X | | Three sided Hanging Box - Mounts standard electrical outlets or communication devices with either NEMA standard single gang screw-on or PANDUIT Snap-On Faceplates. When used with TGDW divider wall, bo...Read More
|
$11.81
| Detail Box
In Stock |
|
| 16. | 
Model # TGFSB | | Fiber Spool Bracket - Each piece consists of two halves that snap onto base of TG Raceway. Provides method to contain one (1) meter or more of fiber slack and provides a strain relief. Provides 32mm ben...Read More
|
$14.92
| Detail Box
In Stock |
|
| 17. | 
Model # TGTRIW | | Transition Fitting from TG to T-45 - Provides a tee transition from TG raceway to T-45 and LD series size 5 and 10. Use with RF5X3 reducer fitting to transiton to LD series size 3....Read More
|
$22.23
| Detail Box
In Stock |
|
| 18. | 
Model # FMS100X6 | | 6 ft. roll x .100" wide for use with PD6, LDP5, LPD10, LD5, LD10 Raceways....Read More
|
$29.97
| Detail Box
Usually ships in 48 hours |
|
| 19. | 
Model # SRT | | Pan-Way Surface Raceway Cutting Tool. Used to easily cut all sized of Types LDP, LD2P, LD, LDS, and PD raceway. Leaves a clean burr-free end on raceway. Can also be used to cut plastic conduit. Read More
|
$129.97
| Detail Box
In Stock |
|
Email Page
