Viking Clock Controlled Digital Announcements Kit |
(Model # VK-CC-DA) Note: Picture may not represent the actual product. We are continuously working on improving our website and reserve the right to change specifications, availability, and pricing without prior notice. Timed activated announcements for social distancing over an existing paging system.
CTG-1A Features:
- Accurate 24 hour digital time clock displays hours and minutes synced to AC power
- User programmable 24 hour, 128 event timer in two separate schedules
- Programmable day of week on/off feature
- Programmable single, double or triple alert tone output (selectable bong or buzzer)
- Three contact closure controlled sounds: 1) Emergency siren (yelp) sound, 2) Temporal (slow whoop) evacuation signal *NFPA/ANSI compliant when used with supporting equipment, 3) Doorbell (chime) sound
- Volume controllable, 600 ohm line level audio output
- Non-volatile memory with four day clock backup
- Two sets of DPDT relay contacts for muting paging or background music during alert tones or timed relay events
- Switchable 50/60 Hz operation
- Switch for Daylight Saving Time
- Time Relay Mode
DVA-2W Features:
- Digital announcer/recorder
- Built in 2 watt amplifier to connect directly to speakers
- Designed to providemusic and promotion on hold by using playback in a continuous loop or alternating between promotions and an auxiliary music source at 2 second to 30 minute intervals
- Any number of multiple messages may be recorded
- Announcer comes with four professionally pre-recorded promotions on hold pacifier messages, as well as, power supply and cabling for an easy plug and play installation
- Output may be connected directly to loudspeakers with messages repeated in timed intervals or played at the push of a button for museum displays, information booths, point of interest locations, etc.
- 7.5 minutes of user recordable memory (select fromuser recorded messages or four pre-recorded on-hold pacifier messages)
- Three playback options:on demand, continuous, and timed intervals
- Non-volatile memory (no batteries required)
- Record from electret mic, carbon handset, tape, CD, PC sound card or any line level device
- 600 ohm audio output for high wattage amplifiers
- Multiple message capabilities (total number of messages only limited to maximum record time)
- AGC (Automatic Gain Control) for trouble free recording
- Auxiliary audio (MOH) input for between message background music
- Remote trigger input for on-demand playback from a remote contact closure
- Press and hold play mode
- Status LED forrecord and playback indication
- Master and auxiliary input volume controls
- I.O. communications port (allows only one DVA-2WA to announce at a time)
| |
|