Hobbes USA NETest with 4 Remote Identifiers |
(Model # 256450) Note: Picture may not represent the actual product. We are continuously working on improving our website and reserve the right to change specifications, availability, and pricing without prior notice. Comprehensive cable tester used to diagnose wiring faults for 10BASE2 (Coax), 10BASE-T, and 100BASE-Tx, TIA-586A, TIA-568B & Token Ring cables. Identify wiring faults such as open wires, shorts, reversed pairs, crossed pairs, split pairs and mis-wiring. Identify up to 4 different cables from the tested end. With a push of a button, the NETest will automatically scan all wires and pairs to determine any existent faults. A large alphanumeric LED displays the fault code; while a series of smaller LEDs indicate which pair the fault is existent on. For testing of installed cables, 4 remote terminators are provided. The terminators are also used to identify which cable is being tested. Makes cable testing for multiple LAN interfaces virtually effortless.
Features:
- High speed testing and detailed fault identification of UTP/STP and coaxial cables
- Verifies adherence to 10BASE-2, 10BASE-T, 100BASE-T, TIA-568A, TIA-568B and Token Ring wiring standards
- Identifies shorted wires, open wires, crossed pairs, reversed pairs, split pairs and miswiring
- Split pair detection:
- Min. 1.2m (about 4 Feet)
- Max. 150m (about 492 Feet)
- Identifies up to 4 different cables with provided remote identifiers (256450)
- Large alphanumeric LED clearly displays fault status
- Includes carrying pouch with belt loop
Specifications:
- Power Source: (one) DC 9V battery
- Power Consumption: 30mA
- Operating Temp: 0~50 degrees C
- Storage Temp: -10~60 degrees C
- Humidity: 0 to 95%(non-condensing)
- Dimensions:
- Base 115mm x 76mm x 36mm
- Remote 68mm x 32mm x 25
- Safety Approval: CE
- Approx. Weight: 260g(Kit) / 35g(Remote)
| |
|