Tripp Lite 2500 Watt PowerVerter Inverter/Charger

Features:

• 3-function DC-to-AC inverter with automatic line-to-battery transfer and integrated charging system serves as an extended run UPS, a standalone power source or an automotive inverter
• 1250 watts continuous output power (while inverting); provides up to twice this rating for momentary startup of inductive loads. Provides 1440 watts of power while passing through utility AC; the pass through power the APS1250 can supply is limited by the facility/vehicle circuit board which the APS1250 is connected to
• When AC cable is connected to a live wall socket, commercial power passes through to connected equipment and the battery set is recharged via 3 stage, 30 amp charging system
• Reliable transformer design, with efficient PWM sine wave output and frequency control, powers resistive electronic loads or large inductive motors, compressors and other items with high current needs on startup
• In UPS mode, the APS system responds to blackouts and brownouts with an uninterrupted transfer to battery-derived AC output. Includes a set of high current DC input terminals for simple installation (user supplies batteries and cabling)
• Supports an unlimited amount of runtime with any number of user-supplied batteries connected
• Highly adaptable to a variety of applications and site conditions with adjustable charger settings for wet/gel battery types and selectable line to battery power transfer voltages
• 2 outlets; 6 ft. AC power cord; DC input terminals for 12V battery connection
• Converts 12V DC to 120V AC
• Frequency control for operating stability
• Coated internal circuit boards offer continuous operation in humid environments (0-95%, non-condensing)
• Advanced 30 amp, 3-stage battery charger and selector switch for gel or wet cell batteries
• 6 diagnostic LEDs indicate AC present, on battery, charge rate, overload & battery voltage level (high, medium & low)
• Functions as an extended run UPS system, standalone power source and automotive inverter
• Battery runtime is dependent upon the size and number of user-supplied 12-volt batteries used
• Includes AC input cord and auto-transfer to enable battery charging and automatic UPS support for blackouts & brownouts
• RJ45 port allows connection of APS/PowerVerter Remote Switch (manuf# APSRM4)
• Switch allows user to select between off, auto-invert/remote and charge-only settings
• Configuration switches to allow the user to select the high and low voltage for the unit to automatically transfer from AC power to battery backup
• Resettable circuit breaker protects APS against system overload