Tripp Lite PowerVerter APS Inverter/Charger |
| (Model # APS-750) Note: Picture may not represent the actual product. We are continuously working on improving our website and reserve the right to change specifications, availability, and pricing without prior notice. PowerVerter APS Inverter/Charger is a standalone power source or an automotive inverter supplies up to 750 watts of continuous 120V AC power to 2 AC outlets from any 12V battery or automotive DC source.
Features:
- 750 watts continuous output power (while inverting); provides up to twice this rating for momentary startup of inductive loads. Provides 960 watts of power while passing through utility AC; the pass through power the APS750 can supply is limited by the facility/vehicle circuit board which the APS750 is connected to
- 2 outlets; 6 ft. AC power cord; DC input terminals for 12V battery connection
- Converts 12V DC to 120V AC
- Frequency control for operating stability
- Coated internal circuit boards offer continuous operation in humid environments (0-95%, non-condensing)
- Advanced 20 amp, 3-stage battery charger and selector switch for gel or wet cell batteries
- 6 diagnostic LEDs indicate AC present, on battery, charge rate, overload & battery voltage level (high, medium & low)
- Functions as an extended run UPS system, standalone power source and automotive inverter
- Battery runtime is dependent upon the size and number of user-supplied 12-volt batteries used
- Includes AC input cord and auto-transfer to enable battery charging and automatic UPS support for blackouts & brownouts
- RJ45 port allows connection of APS/PowerVerter Remote Switch (manuf# APSRM4)
- Switch allows user to select between off, auto-invert/remote and charge-only settings
- Configuration switches to allow the user to select the high and low voltage for the unit to automatically transfer from AC power to battery backup
- Resettable circuit breaker protects APS against system overload
| |
|
Email Page
