Leviton Wall Switch Occupancy Sensor

Occupancy Sensor Features:

• Manual-ON (Vacancy Sensor) or Automatic-ON (Occupancy Sensor) switching
• Engineered to control current LED, CFL and incandescent loads
• Ensure that lights/motors will turn ON manually (vacancy) or automatically (occupancy) and turn OFF automatically when motion is no longer detected within the covered range
• Designed to fit in a standard wallbox, both devices offer 180° Field of View and 900 square foot of coverage
• Single pole, relay-based and designed to replace a single pole switch for loads such as exhaust fans
• Adjustment: Manual
• Sensor Technology: Passive Infrared
• Time Adjustment: 30s-30m
• Load Rating: 600W Incand/FL Ballast 150W LED/CFL, 1/6 HP Motor
• Voltage: 120 Volt AC 60 Hz
• Neutral wire not required for retrofit and new construction applications
• Low-Profile design eliminates an obtrusive "scanning device" look. Elegant styling compliments any interior and coordinates with Leviton's popular line of Decora® wiring devices
• Convenient push-button provides Manual OFF light switching at any time
• Segmented lens provides optimum sensitivity and performance. It is designed with an extensive "minor motion" area where even slight body movements will be detected
• Four optional manual adjustments for delayed-OFF time settings maximize energy savings: 30 seconds (for walking test), 10 minutes, 20 minutes and 30 minutes
• LED Indicator Light flashes when sensor detects motion to verify detection is active
• Unit can be used for 120V lighting. Compatibile with both electronic and magnetic ballasts or 1/6 HP loads
• Color: White, Ivory, Light Almond