(Model # K-1775-3) Note: Picture may not represent the actual product. We are continuously working on improving our website and reserve the right to change specifications, availability, and pricing without prior notice. The K-1775 Series video entry phones provide a durable and attractive hands-free phone for apartment and residential door entry or applications requiring a vandal resistant speaker phone with integrated color video camera and 125 KHz Proximity Card Reader.
K-1775-3 Features:
- Apartment entry phone when used with the K-1900-3 Apartment Entry Dialer or C-4000 Apartment/Office Entry Controller or C-3000 Apartment Entry Controller
- Use with a Viking C-500 to control 1 or 2 (expandable to 8) K-1700s and door/gate control on a single phone line
- Use with a Viking C-2000B to control 1 to 4 K-1775s and door/gate control on a single phone line
- Courtesy and customer assistance phone
- Automated teller (ATM) phone
- Security or emergency phone
- Hot-Line phone when used with the K-1900-5 Hot-Line Dialer
- Two sets of SPDT 2 Amp relay contacts for door/gate or camera control
- Kiosk phone with (100 number speed dialing) when used with the K-1900-9 Multi-Number Dialer
- Built-in 125KHz 26-bit Wiegand proximity card reader with LED and beep card read confirmation and EWP board protection
- Built-in high resolution color video camera with wide viewing angle, tilt/swivel adjustments, and wide operating temperature of -30° F to 150° F
- Vandal Resistant Features: 14 gauge louvered 316 stainless steel faceplate with permanent laser etched graphics, stainless steel Call button, heavy duty metal keypad and T-10 Torx Security mounting Screws, scratch resistant powder coating (K-1775-3-BN)
- Weather Resistant Features: Marine grade 316 stainless steel faceplate, screws and push button switch. Switch internally sealed per IP67
- Mylar speaker, Self-draining mic mount, Faceplate, mic and speaker gaskets, Weather Resistant powder paint (K-1775-3-BN)
- K-1775-3-EWP is designed to meet IP66 Ingress Protection Rating
- Available in 2 standard faceplate finishes: 316 brushed stainless steel or oil rubbed bronze
- Blue in use LED
- Telephone line powered
- Volume adjustments for microphone and speaker
- Advanced call progress detection: disconnects on busy signal, return to dial tone, CPC, reorder tone, maximum call time out and 40 second silence time out
- Selectable auto-answer feature for monitoring
- Selectable push button disconnect
- Volume adjustments for microphone and speaker
- Selectable auto-answer feature for monitoring
- Zinc plated steel rough-in box with (2) 3/4 conduit knockouts
- Optional VE-6X7 Surface Mount Box available
- Selectable VOX switching speed
Specifications:
- Power: Telephone line powered 20V DC/20mA minimum
- Dimensions: Overall: 140mm x 165mm x 66mm (5.5 x 6.5 x 2.6) , Rough-in box: 114mm x 140mm x 64mm (4.5 x 5.5 x 2.5)
- Environmental: -29°C to 54°C (-20°F to 130°F)
- Humidity - K-1770-3: 5% to 95% non-condensing
- Humidity - K-1770-3-EWP: Up to 100% condensing
- Speaker Volume: Approximately 70 db maximum @1m
- Connections: Gel-filled tip and ring connectors
- CPC Disconnect Time: 500ms minimum
- REN #: 0.5 A
Camera Specifications:
Power: 6-22V DC 150mA (12V DC UL Listed adapter included)
Image Sensor: 1/4 color CMOS Video Output: 1 VP-P composite, NTSC, 75 ohms
Resolution: 420 lines (640 x 480 @ 30fps / 307,200 pixels)
Sensitivity: 0.025 LUX (50 IRE) F 1.2 3200K
Lens: 2.1mm, conical pinhole
FOV(Field of View): 80° Horizontal, 60° Vertical, 100° Diagonal
Tilt/Swivel Adjustment: Vertical +/- 20°, horizontal +/- 30° (see Diagram A)
IR Compatibility: This camera is equipped with an OLP (Optical Low Pass) filter to maintain correct video color in outside applications
The standard camera is NOT compatible with IR illuminators
If IR illumination is required, you will need to replace the exisiting camera with a Viking model VCAM-1IR
Maximum Wire Run Length: See product manual (see manual)
Proximity Card Reader Specifications:
- Power: 5 to 14V DC @ 60mA maximum
- Maximum Cable Length: 500 ft 24 Awg stranded shielded (Belden 9537)
- Frequency: 125KHz
- Format: 26 bit Wiegand
- Read Range: 1.25 to 2.0
- Technologies Supported: Viking PRX-C, PRX-C-ISO, PRX-FOB
- Transducer: Beeps during card read
- LED: Red, turns off during card read
- Humidity: Up to 100% (fully potted EWP)
- Operating Temperature: -34° C to 65° C (-30° F to 150° F)
Display all product SKU information
SKU | Finishes |
Weather Protection |
K-1775-3-EWP | Stainless Steel |
Enhanced |
K-1775-3 | Stainless Steel |
Standard |
K-1775-3-BN | Oil Rubbed Bronze |
Standard |
K-1775-3-BN-EWP | Oil Rubbed Bronze |
Enhanced |
| |