Viking SIP Multicast Paging Adapter with Amplifier |
| (Model # PA-IP) Note: Picture may not represent the actual product. We are continuously working on improving our website and reserve the right to change specifications, availability, and pricing without prior notice. The Viking model PA-IP SIP / Multicast Paging Adapter provides an interface between new VoIP phone systems (hardware or hosted/cloud based) and analog paging systems, eliminating the need for an ATA or FXS port.
PA-IP Features:
- PoE powered (class 3, <13 watts)
- Paging prioritization
- Plays audio from multicast
- SIP endpoint or multicast group member
- Supports up to 10 multicast paging groups
- Red “Page/Status” LED indicator
- SIP compliant
- Network downloadable firmware
- Autoprovisioning via Viking programming software
- Built-in high efficiency 4 watt class D amplifier
- Relay for activating door locks, strobe lights, external amplifiers, etc.
- SIP/Multicast: SIP page, SIP page and zoned multicast stream, zoned multicast receive
- Support for access code to prevent unwanted SIP calls
- Line-level audio output for connecting to an external amplifier
- Network remote volume control
- Can drive additional external analog speakers for greater coverage
PA-IP Specifications:
- Power: PoE class 3 (<13 watts)
- Dimensions: 5” x 5.25” x 1.5” (127mm x 133mm x 38mm)
- Operating Temperature: -40°F to 140°F (-40° C to 60° C)
- Humidity: 5% to 95% non-condensing
- Audio Codecs: G711u, G722 and G711a (SIP only)
- Network Compliance: IEEE 802.3 af PoE, SIP 2.0 RFC3261, 100BASETX with auto cross over
- Sensitivity: 96dB / 1W / 1M S.P. Level
- Frequency Response: 55 – 18,000 Hz (+/- 10 dB)
- Connections: (1) RJ45 10/100 Base-T, (1) 8 position terminal block
| |
|
Email Page
