|
1. | Model # 17100 | | Magnetic clips are designed to hold a 25-pair cable or several electrical cords. Keeps cables neat within workstation areas neat and off of the floor to reduce the danger of accidents. Read More
|
$13.88
| Detail Box | Product Brochure (pdf)
Usually ships in 3 weeks |
|
2. | Model # 10559 | | These brackets mount to the back of the rack channel to provide a convenient point to tie-down cable runs....Read More
|
$14.66
| Detail Box | Product Brochure (pdf)
In Stock |
|
3. | Model # 17000 | | Magnetic clips are designed to hold a 25-pair cable or several electrical cords. Keeps cables neat within workstation areas neat and off of the floor to reduce the danger of accidents. Nylon cable tie...Read More
|
$16.71
| Detail Box | Product Brochure (pdf)
In Stock |
|
4. | Model # 20502 | | This innovative flush-mount wall board bracket is designed to hold round style modular jack plate assemblies. To install, simply drill a 2 3/8" diameter hole into dry wall, insert bracket into hole and...Read More
|
$17.40
| Detail Box | Product Brochure (pdf)
Usually ships in 10 days |
|
5. | Model # 10001 | | Mounts to the back of the rack channel to provide a convenient tie-down point for grounding and bonding cable runs. Either end of the nylon bracket can be attached to the rack or cabinet face, allowin...Read More
|
$18.12
| Detail Box | Product Brochure (pdf)
Usually ships in 2 weeks |
|
6. | Model # 11322 | | Designed to support heavy cable runs, such as multiple PBX cable, IBM cabling, etc. Easily routes cabling wherever ceiling support of heavy cable is required. Can also be suspended from threaded drop rods....Read More
|
$19.44
| Detail Box
Usually ships in 2 weeks |
|
7. | Model # 10921-500 | | Designed to support heavy cable runs, such as multiple strand PBX cable, data cabling and coax, along walls or wherever wall support of heavy cable runs are needed....Read More
|
$19.49
| Detail Box
Usually ships in 2 weeks |
|
8. | Model # 10910-500 | | Designed to support heavy cable runs, such as multiple strand PBX cable, data cabling and coax, along walls or wherever wall support of heavy cable runs are needed....Read More
|
$19.85
| Detail Box
Usually ships in 2 weeks |
|
9. | Model # 10920-500 | | Designed to support heavy cable runs, such as multiple strand PBX cable, data cabling and coax, along walls or wherever wall support of heavy cable runs are needed....Read More
|
$23.90
| Detail Box | Product Brochure (pdf)
Usually ships in 2 weeks |
|
10. | Model # 10900-500 | | Designed to support heavy cable runs, such as multiple strand PBX cable, data cabling and coax, along walls or wherever wall support of heavy cable runs are needed....Read More
|
$27.44
| Detail Box | Product Brochure (pdf)
Usually ships in 2 weeks |
|
11. | Model # 11570 | | Have you ever pulled cables out of rack-mounted equipment accidentally? Do you need to maintain a minimum bend radius for your cabling? Our rack- mounted cable strain relief may just be the answer. Mad...Read More
|
$333.53
| Detail Box | Product Brochure (pdf)
Usually ships in 130 days |
|
12. | Model # BR-150-SSC | | 1-1/2" direct mount bridle ring with drive pin & washer attached for quick installation by a standard power actuated tool/gun. Package of 100. Read More
|
Click here to contact Sales for pricing! | Detail Box | Product Brochure (pdf)
|
|
13. | Model # DRV | | Galvanized nail on drive ring. Available 25 pieces per Box. Read More
|
Click here to contact Sales for pricing! | Detail Box
|
|
14. | Model # BCXXM | | The "lightweight-heavyweight" alternative to malleable clamps for support of various components to beam. Pre-riveted combinations available....Read More
|
Click here to contact Sales for pricing! | Detail Box
|
|
15. | Model # BC200-CDXB | | Fit flanges up to 5/8" and accept 1/4"-20 threaded components. Available pre-riveted to conduit/pipe hangers up to 2"....Read More
|
Click here to contact Sales for pricing! | Detail Box
|
|
16. | Model # 812MB18S | | The Combination Box/Conduit Hangers provide 66% less Drop Wires in rod/wire applications....Read More
|
Click here to contact Sales for pricing! | Detail Box
|
|
17. | Model # CAT12ESC | | The Snap-in J-Hook is the ideal solution for retrofit and add-on installations since it uses the existing strut framework. Available in a box of 40....Read More
|
Click here to contact Sales for pricing! | Detail Box
|
|
18. | Model # BR-200-TW | | 2" cable loop toggle wing set bridle rings have 3-1/2” long stranded threaded legs for hollow walls....Read More
|
Click here to contact Sales for pricing! | Detail Box
|
|
19. | Model # BC-1024 | | Garvin BC-1024 Stamped Steel Beam Clamp With 3/4" Jaw Opening and 10-24 Threaded Holes....Read More
|
Click here to contact Sales for pricing! | Detail Box
|
|
20. | Model # BC-1420 | | Garvin BC-1420 Stamped Steel Beam Clamp With 3/4" Jaw Opening and 1/4-20 Threaded Holes (Package of 100)....Read More
|
Click here to contact Sales for pricing! | Detail Box
|
|